How to mirror objects on a planogram

For v2016.1 and previous versions, select Settings --> Display.
For v2017.1 and future versions, select Space Planning Home button on upper left  > Settings. 

1. Select the planogram or planogram object you want to mirror.
2. In the Adjust group of the Build ribbon, click Mirror. The Mirror dialog box is displayed.
3. Select from the following check boxes for the components you want to mirror:
   • Reverse within selected planograms
     Specifies object settings that can be mirrored for the selected planograms. When a planogram is selected, you can mirror the location of segments, fixtures, text boxes, and drawings within the planogram. You also can reverse the traffic flow of the planogram. When you mirror fixture location, the fixture rotation settings (Angle and Roll) (for all fixture types except curved rod), and the location of fixtures within assemblies are also mirrored. You also can select child object settings under Reverse within selected segments, Reverse within selected fixtures, and Reverse for selected positions to mirror additional objects on the planogram.
   • Reverse within selected segments
     Specifies object settings that can be mirrored for the selected segments. When a segment is selected, only the door handle location can be mirrored.
   • Reverse within selected fixtures
     Specifies object settings that can be mirrored for the selected fixtures. When a fixture is selected, you can mirror its merchandising direction, left and right overhangs, and the location of positions, attached fixtures, and manual dividers on the fixture. You also can specify additional position-specific settings under Reverse for selected positions, including the rotation angle and roll for attached fixtures.
   • Reverse for selected positions
     Specifies position attributes that can be mirrored for positions on the selected parent objects. If a position is selected, you can mirror only attributes for the position, including the position's rotation (Angle and Roll) and horizontal capping or nesting. You also can mirror the location of floating positions, relative to the center of the planogram.
4. Click OK.

Note: If you do not have all options available under tools/mirror, then you will need to go to settings/manipulation and make sure that all items are checked. Then reselect the planogram and go to tools/mirror again.